Welcome to HEBEI HOLMAN Auto Parts Co.,ltd.



CURRENT LOCATION:HOME > NEWS > Frequently Asked Question >

Zinc paste bent balance block

2018-07-11 17:40:31

The product adopts metal zinc die-casting molding, the surface is treated by epoxy resin electrostatic spraying, and the back is pasted with side tape, which is not only environmentally friendly, beautiful and durable, but also convenient to operate.We are the only company producing this product at present. It is our specialty.

Method of use: the working environment temperature is 16 degrees above, dry clean hub, according to balancing machine grams, choose a different weight of balance block (can be broken or scissors to cut it short in a straight line, each divided by the total number of grams of each blocks = monolithic weight), torn off the back of the plastic protective film, paste the press can be directly, paste paste intensity 80% for 24 hours, 72 hours of up to 100%.

Note: it is advisable to keep a good dynamic balance and drive no more than 60km/h within 24 hours, otherwise it will fall off easily, and can drive normally after 72 hours.